customize 2.0mm board to board connector China manufacturers-ELETE

Language

Quote Now

language

产品管理

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册

Home

2.0mm Board to Board Connector China: Triple Row Right Angle Pin Header for PCB Applications

Oct 21,2026

A Compact Connector Design for PCB Integration

In electronic assemblies, connector selection affects how circuit boards are connected and how components are arranged within a device. Our 2.0mm Pitch Triple Row Right Angle Pin Header Connector is designed for through-hole mounting and features a right-angle orientation with a triple-row contact arrangement. For buyers searching for a 2.0mm board to board connector China, this pin header provides a defined set of electrical, mechanical, and material specifications for evaluating its suitability for an electronic assembly.

With a 2.0mm pitch, this male header is designed around a compact contact layout. Its through-hole mounting type supports installation through printed circuit board holes, while the right-angle orientation determines how the connector is positioned relative to the PCB. These characteristics are important when planning board layouts and determining how a connector will fit into an assembly.

Triple-Row Contacts and Right-Angle Orientation

The connector combines three key structural features: a 2.0mm pitch, three contact rows, and a right-angle configuration. Each feature contributes to the connector's physical arrangement and should be considered during PCB design.

The triple-row layout provides three rows of contacts within the connector structure. The 2.0mm pitch defines the spacing between adjacent contact positions, giving designers a specific dimension to use when preparing the corresponding PCB footprint.

The right-angle orientation is another important consideration. Unlike a straight pin header, a right-angle connector has contacts arranged to extend horizontally relative to its mounting direction. This configuration can be considered when the available installation space and the direction of the mating connection influence component placement.

As a male header, the product is intended to serve as the pin side of a compatible connection. Engineers should verify the mating connector, pin arrangement, and PCB footprint against the requirements of the complete assembly before finalizing the design.

Through-Hole Mounting for Board Assembly

Our connector uses through-hole technology (THT), also known as dual in-line package (DIP) mounting in the product description. This mounting approach involves inserting connector leads through prepared holes in the PCB.

When incorporating the header into a circuit board, the hole pattern, pad layout, contact spacing, and right-angle orientation need to match the intended assembly design. Correct footprint preparation is particularly important for a triple-row connector because all three rows must align with the corresponding PCB holes.

The contact size is specified as 0.50mm square. This dimension should be included when checking the connector footprint and the mechanical requirements of the intended board.

By confirming these details during the design stage, buyers and engineers can assess the connector against their PCB layout and assembly requirements before production.

Electrical Specifications for Design Evaluation

The connector has defined electrical ratings and resistance values that help engineers review its intended operating conditions.

Parameter	Specification
Pitch	2.0mm (0.079 inch)
Gender	Male header
Number of rows	Triple row
Mounting type	Through-hole (THT)
Orientation	Right angle
Contact size	0.50mm square
Current rating	2A
Insulation resistance	1000MΩ minimum
Dielectric withstanding voltage	500V AC
Contact resistance	20mΩ maximum
Operating temperature	-40°C to +105°C

The 2A current rating is one of the key electrical values to check when assessing the header for a circuit. Insulation resistance is specified at a minimum of 1000MΩ, while contact resistance is limited to a maximum of 20mΩ. The dielectric withstanding voltage is rated at 500V AC.

These specifications should be evaluated alongside the electrical requirements of the complete system. The connector's suitability depends on the actual operating conditions and the design of the associated components and circuit board.

Contact and Insulation Materials

Material selection is another consideration when comparing connectors for electronic assemblies. This product specifies brass or phosphor bronze for the contact material and high-temperature polyester, UL94V-0 LCP/NL6T/PA9T for the insulation material.

The listed contact materials identify the conductive materials used in the connector, while the specified insulation materials describe the options stated for its insulating structure. The exact material configuration should be confirmed for the version selected for a particular project.

The connector's operating temperature range is -40°C to +105°C. Engineers should compare this range with the temperature conditions expected in their equipment and verify that the selected material configuration meets the requirements of the application.

Reviewing contact material, insulation material, and operating temperature together provides a more complete basis for connector selection than considering pitch alone.

Selecting a 2.0mm Pin Header for Your Project

Before choosing a triple-row right-angle pin header, buyers should confirm several details with their engineering or purchasing teams.

First, verify that the 2.0mm pitch and three-row arrangement match the PCB footprint. Next, check the right-angle orientation and through-hole mounting configuration against the available installation space. The 0.50mm square contact size should also be considered during footprint review.

Electrical requirements need equal attention. The specified 2A current rating, insulation resistance, dielectric withstanding voltage, and contact resistance should be compared with the intended circuit conditions. Finally, confirm the required contact and insulation materials and the expected operating temperature range.

These checks help establish whether the connector's documented specifications align with the project requirements without relying on assumptions about unlisted features.

Contact Us for Connector Information

Our 2.0mm Pitch Triple Row Right Angle Pin Header Connector combines a defined contact pitch, triple-row layout, through-hole mounting, and right-angle orientation. Its electrical ratings, material specifications, and operating temperature range provide key information for evaluating the product during PCB design and component selection.

If you are sourcing a 2.0mm board to board connector in China, contact us to discuss your connector requirements and confirm the specifications needed for your application.