img
nothing
language
中国
韩国
韩国
韩国
韩国
韩国
img
img
M12&M8
Press-fit
OEM
01

Cheapest 2.54mm pitch pin header introduces the soldering knowledge of the header

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-11-26 10:49
  • Views:

(Summary description)Place the soldering iron tip on the pin header and the soldering surface, and then feed the solder wire in 1 second. Remove the solder wire first when appropriate, and then remove the soldering iron. Because the solder paste is applied in advance, the solder wire will naturally fit the welding surface after melting, making it easy to fit and weld.

Cheapest 2.54mm pitch pin header introduces the soldering knowledge of the header

(Summary description)Place the soldering iron tip on the pin header and the soldering surface, and then feed the solder wire in 1 second. Remove the solder wire first when appropriate, and then remove the soldering iron. Because the solder paste is applied in advance, the solder wire will naturally fit the welding surface after melting, making it easy to fit and weld.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-11-26 10:49
  • Views:
Information

Do you know the soldering knowledge about pin headers? Follow the editor of Cheapest 2.54mm pitch pin header to have a simple understanding!
1. Pre-processing pre-processing includes three beginnings:
Prepare a fixed fulcrum: This example uses a breadboard to fix the pin headers.
Apply solder paste: Apply solder paste to the soldering surface, not too much.
Heating the soldering iron: Heat the soldering iron for 2 minutes, and pay attention to removing the residue on the tip of the soldering iron.


Precautions:
1. If the soldering iron is not at a constant temperature, please do not touch the soldering surface for a long time to prevent the electronic components from being burnt out!
2. In the case of too many soldering points, pay attention to a pause in the middle to prevent damage to the components caused by heating for a long time!
Second, the method
Place the soldering iron head on the pin header and the soldering surface, and then feed the solder wire in 1 second. Remove the solder wire first when appropriate, and then remove the soldering iron. Because the solder paste is applied in advance, the solder wire will naturally fit the soldering surface after it has melted, making it easy to fit and solder.
The above is the editor of Cheapest 2.54mm pitch pin header: a brief introduction to the welding knowledge of the header. Companies involved in making 5G components require state-of-the-art testing to measure capabilities of beamforming, radiation emissions, high-gain antennas, low-loss and high-frequency connectors, and more.

Keyword:

ELETE TECHNOLOGY CO., LTD

Contact us
Contact us
Message application name:
footer
Description:
Online Message

Please leave a message here! We will send you detailed technical information and quotation!