M8 connector, also known as sensor connector, is divided into two types: with cable and without cable. The outlets are 4-6 and 6-10. The length of the cable with cable is 1 meter, 2 meter, 5 meter and 10 meter.
With the rapid economic development, all walks of life have used the M8 connector, which has led to an increase in its demand.
The manufacturing process of M8 connector generally starts with stamping pins. Through a large high-speed stamping machine, the connector is stamped from a thin metal belt. One end of the large coil of metal belt is fed into the front end of the punching machine, and the other end is wound through the hydraulic worktable of the punching machine. Into the winding pulley, the metal belt is pulled out by the winding pulley and the finished product is stamped out.
For 10pin IDC ribbon cable connectors price, including: the outer casing; a fixing block, installed in the approximate middle position of the outer casing, to divide the outer casing into a left accommodating part and a right accommodating part;