img
nothing
language
中国
韩国
韩国
韩国
韩国
韩国
img
img
02
03
04
01

Cheapest IDC connector introduction: the knowledge that the connector needs to consider when choosing the terminal!

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-08-24 17:02
  • Views:

(Summary description)Current requirements can be said to be an important aspect to consider, because pushing too much current through the terminal block can cause overheating and damage the terminal block. Therefore, when selecting a terminal for the connector, please make sure that the selected terminal can actually handle the expected current plus 50% or more of the current.

Cheapest IDC connector introduction: the knowledge that the connector needs to consider when choosing the terminal!

(Summary description)Current requirements can be said to be an important aspect to consider, because pushing too much current through the terminal block can cause overheating and damage the terminal block. Therefore, when selecting a terminal for the connector, please make sure that the selected terminal can actually handle the expected current plus 50% or more of the current.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-08-24 17:02
  • Views:
Information

Terminals are an important component of the connector, and the connector needs to consider the current requirements, voltage requirements, and wires used in the terminal. Follow the editor of Cheapest IDC connector to have a simple understanding!
1. The main points of current consideration of the terminal
Current requirements can be said to be an important aspect to consider, because pushing too much current through the terminal block can cause overheating and damage the terminal block. Therefore, when selecting the terminal block for the connector, please make sure that the selected terminal block can actually handle the expected current plus 50% or more of the current. For example, if the expected current of 2A is to be drawn from the block, a terminal block with a rated current of 3A is sufficient.


2. Points to consider for the voltage of the terminal
Just like current consumption, voltage also needs to be taken into consideration. Voltage will cause dielectric breakdown. Therefore, too high voltage for terminals may cause current leakage between adjacent terminals. Although there are usually few high voltage requirements in the design, this is why voltage considerations are usually ignored for voltages below 100V. However, it is still important to check this number before choosing a junction box.
3. Key considerations for wires used in terminal blocks
Not all wires are the same, and each type of wire has its own advantages and disadvantages. For example, when choosing a terminal block for a cable, you must know the size of the cable (whether it can be installed in the terminal block) and whether it is single-core or multi-core. Multi-core wires perform well in screw terminals, while single-core wires perform well in push-in connectors.
In summary, the editor of Cheapest IDC connector tells: You can learn more about the knowledge that needs to be considered when choosing a terminal for a connector.

Keyword:

img

Buy Pin header for LED light products The plating on the busbar can improve the electrical performance

Buy Pin header for LED light products The optimization of electrical performance can be considered from the following aspects, that is, the control of the existing and upcoming film on the surface of the contact plating layer. One of the main requirements for the electrical performance of pin headers is to establish and maintain a stable pin header impedance.

ELETE TECHNOLOGY CO., LTD

Contact us
Contact us
Message application name:
footer
Description:
Online Message

Please leave a message here! We will send you detailed technical information and quotation!